HackMD
2.6 KiB
Installation
The NodeMCU is a development board featuring the popular ESP8266 WiFi chip. As it turns out, you can program the ESP8266 just like any other microcontroller. Its obvious advantage over the Arduino or PIC is that it can readily connect to the Internet via WiFi.
MicroPython is a re-implementation of Python 3 targeted for microcontrollers and embedded systems. MicroPython is very similar with regular Python. So, if you already know how to program in Python, you also know how to program in MicroPython.
PuTTY is a free and open-source terminal emulator, serial console and network file transfer application. It can also connect to a serial port.
Steps
-
Install Python On windows 10
Visit https://www.python.org/ and download the latest version of python install it on your machine.
Do not forget to check the add to path while installing on you machine
-
Install ESPTool
Use your terminal to complete this step and using the command below.
pip3 install esptool -
Download ESP8266 firmware
Visit https://micropython.org/download and download the latest version of ESP8266 bin file for windows and install it on your machine.
-
Plug in Device
Now plug in your NodeMCU 8266 device using a USB wire in to your machine and go to the next step after confirming that its properly plugged.
Remember the port number mentioned
-
Erase Flash
Use the command below to erase flash in your powershell.
esptool.py --port /dev/ttyUSB0 erase_flash -
Execute upload command
Use the command below to upload bin file in your powershell.
esptool.py --port /dev/ttyUSB0 --baud 460800 write_flash --flash_size=detect 0 esp8266-20170108-v1.8.7.bin -
Test with Putty Go to https://www.putty.org/ and download the windows version and install it.
Now install it and open the program and follow these steps.
Click on Open button or press Enter and you will be given access to MicroPython Terminal.
Voila, you are set and ready to go and explore the MicroPython World.
-
Install docker
Go to the official docker page and install docker
-
Install ngrok
Go to the official ngrok website and install ngrok
-
Install ampy
Go to the official ampy github page and install ampy
-
Install localxpose
Go to the official localxpose website and install localxpose